Orthodontics
Indication and objective of orthodontic treatment
Orthodontics targets the desired alignment of teeth, dental arches and jaws in relation to one another and other anatomical structures according to aesthetic and functional concepts. All types of dysgnathia can be corrected, these include malocclusion of individual teeth (rotation, tipping, retention, elongation, malposition), malalignment of teeth in the dental arch (overcrowding, overlapping, diastemas), but also incorrect positioning of the maxilla and mandible to one another (occlusal anomalies).
Prophylaxis
Thumb-sucking and other habits are controlled or stopped and (also in interdisciplinary collaboration with other specialist disciplines such as logopaedics) swallowing or speech techniques are trained for example as prevention against malocclusion. Deciduous teeth should be preserved, if possible, or the spaces kept open (space maintainer) after loss of the deciduous teeth. Conversely, prophylactic extraction of teeth can also be practical.
Planning and documentation
In addition to clinical examination of the patient, mainly dental models and X-rays (orthopantomogram, OPM, OPG and lateral cephalometric radiograph LCR) are used in orthodontics for treatment planning and documentation of progress. Measurement in relation to reference points and lines are especially important for assessment.
Timing and duration of orthodontic treatment
In case of congenital anomalies, for example a lip-jaw-palate cleft, orthodontic treatment begins immediately after birth. With certain, highly pronounced and/or prognostically unfavourable malpositions early orthodontic treatments are indicated from age six onwards after eruption of the permanent incisors and first molars. The majority of treatments are performed during the juvenile growth phase before maximum puberty in the late mixed dentition between age nine and twelve. Corrections are also possible, however, with adult patients at any age, providing an alternative to other forms of dental treatments (e.g. dental restorations). The duration of treatment is measured in a minimum of months but generally a number of years may be required. To achieve planned treatment outcomes and prevent relapses retainers are fitted up to age 25 or 30 and sometimes also lifelong.
Forces and anchorage
Teeth are moved selectively by different types of biomechechanical forces (rotation, translation), which may be of natural (growth, movements, particularly in functional orthodontics, FO) or artificial origin. Mechanical appliances are often used as artificial sources of forces, e.g. resilient wires, compression and tension springs, elastics, expansion screws or plastic foils. In the balance between force and opposing force (actio = reactio) anchorage is always required, the stability of which must either be sufficiently predominant to remain practically unchanged or predictably moved in the opposite direction to the object of the movement. Other teeth or other groups of teeth can be used as anchorage as can alveolar bone or mini-implants inserted in the bone, as well as segments of the bony cranium (chin, forehead, back of the head). Forces in orthodontics must always be measured, so as to effect the required movement of teeth but without causing undesired side effects (e.g. resorption of the root cementum).
Appliances
Both fixed (e.g. brackets, bands, attachments, archwires) and removable appliances (e.g. activators and plates) are used in orthodontics. A differentiation is also made between extraoral (e.g. orthodontic facebows) and intraoral appliances. The latter can involve one or both jaws (bimaxillary appliances). Aesthetic orthodontics uses appliances that are as inconspicuous as possible, e.g. tooth-coloured archwires and brackets, transparent foils or lingual technique.
Brackets, molar band, ligatures (X-ray)
Upper and lower retentive bows (OPG)
Surgery
Orthodontically indicated extraction of permanent teeth may also be required (extraction therapy) to remedy or prevent overcrowding. Serious malocclusions and anomalies of the jaw are also treated using orthodontic surgery, such as retention of permanent teeth using combined surgical-orthodontic procedures.
Von uns erhalten Sie professionelle Unterstützung.
Treten Sie mit uns in Kontakt oder nutzen Sie unser Kontaktformular.
Spraynebelabsaugung Durch die Beimengung von Druckluft und das Auftreffen auf schnell rotierende Instrumente entstehen sogenannte "Sprüh-" oder "Spraynebel", also (meist kontaminierte) Aerosole. Sie bestehen aus feinst verteilten Wasser-Tröpfchen ("Nebel") die als "Wolke" während und auch noch einige Zeit nach der Behandlung im Umkreis von bis zu 1,5 m Radius den Patientenmund umgeben. Der Spraynebel enthält daneben aber auch eine Vielzahl weiterer Bestandteile, einerseits feste Partikel diverser eingesetzter und abgetragener Werkstoffe und Zahnhartsubstanzen, andererseits flüssige Anteile wie Speichel oder Blut, die Krankheitserreger aller Art (Bakterien, Viren, Pilze etc.) enthalten. Durch Zerstäubung in eine "Wolke" sind die winzigen Einzeltröpfchen nicht mehr sichtbar, dafür aber besonders geeignet, Oberflächen von Gegenständen im Behandlungsraum, Hautareale anwesender Personen zu kontaminieren oder eingeatmet ("aspiriert"), verschluckt oder über Schleimhäute (etwa der Augen) aufgenommen zu werden. Das wesentliche Ziel zahnärztlicher Hygiene, Kontamination zu vermeiden und Kreuzkontamination zu verhindern, bedeutet in Bezug auf Spraynebel den passiven Schutz des Behandlungsteams durch Mund-Nasenschutz und Augenschutz, vor allem aber auch Absaugung des Spraynebels. Durch gezielte Lenkung und Aufnahme des Luft-Wasserstroms (Arbeitsmethodik, Handhaltung der Assistenzkraft) werden – ohne zuvor die erwünschten Wirkungen zu beeinträchtigen – sämtliche Bestandteile unmittelbar nach der Freisetzung noch in der Mundhöhle möglichst vollständig aufgenommen und damit die "Spray-Nebel-Wolke" erheblich verkleinert. Bereits wenige Jahre nach Aufkommen schnelllaufender zahnärztlicher Übertragungsinstrumente mit Wasserkühlung Mitte des 20. Jh. wurden deshalb geeignete Absauggeräte entwickelt, etwa in Form einer fahrbaren Saugpumpe (1955), der ausdrücklich der Spraynebelabsaugung gewidmeten Sauganlage zur Anwendung bei der Behandlung am liegenden Patienten (1961/1964). Bei modernen Geräten zur Spraynebelabsaugung werden Luft, Wasser und feste Bestandteile (etwa Amalgampartikel) mit integrierten oder angeschlossenen Separier-Modulen voneinander getrennt. Die Durchflusskapazität beträgt mehrere Hundert bis zu 1000 l/min. Durch innovative Technik (etwa den Radialmotor oder elektronische Steuerung) können Platzbedarf, Energieverbrauch und Geräuschentwicklung stark reduziert werden. Wurden "Saugmaschinen" traditionell im Keller aufgestellt, sind heute behandlungsnahe Konzepte möglich. An der zahnärztlichen Behandlungseinheit wird die Saugwirkung mittels flexibler (teils mit Schiebern einzustellender und zu verschließender) Saugschlauchleitungen genutzt. Sie enden in Adaptern zur Aufnahme von starren, in der Regel mehrfach verwendbaren und autoklavierbaren Absaugkanülen mit genormtem Durchmesser (für Spraynebel meist 16 mm). Die mit Griffstrukturierung versehenen Kanülen (in verschiedenen Größen für Kinder und Erwachsene) enden meist in einer flachen Pelotte zum Abhalten von Weichteilen. Zur Vermeidung des Rückflusses abgesaugter Flüssigkeit bei vollständigem Verschluss der Saugöffnung können sie mit stets geöffneten Nebenlufteinlässen versehen sein. Saugschläuche für chirurgische Zwecke (oft mit sterilen Einmalkanülen) oder die Speichelabsaugung (oft mit flexiblen unsterilen Einmalkanülen) weisen meist geringeren Durchmesser auf. Wichtige Maßnahme zur Vermeidung von Verstopfungen, Beschädigungen und der Bildung von kontaminierten Biofilmen (Keimbesiedlung) ist die regelmäßige Spülung, Reinigung und Desinfektion der gesamten Sauganlage mit speziell darauf abgestimmten, nicht-korrosiven Lösungen. |