CAD/CAM-Software in der Zahntechnik
CAD/CAM-Programme für die zahntechnische Anwendung erhalten Scan-Daten d
CAD-Programme haben eine wichtige Schlüsselfunktion innerhalb der zahntechnischen Fertigungskette. Sie ermöglichen eine Darstellung, Verknüpfung und Bearbeitung der erfassten elektronischen Daten. Der Anwender kann die gewünschte Arbeit virtuell planen und im Hinblick auf verschiedenste Parameter (wie etwa Materialstärke, anatomische Gestaltung, Approximalkontakte, antagonistische Kontakte in statischer und dynamischer Okklusion [in virtuellen Artikulatoren], ästhetische Wirkung, Abstimmung auf andere Komponenten) optimieren.
Nach abgeschlossener computerunterstützter Gestaltung (CAD) erfolgt die Übergabe der Planung an die ebenfalls computergestützte Fertigung (CAM). Sie kann unmittelbar angeschlossen sein oder zeitlich wie räumlich in weitem Abstand erfolgen.
Das gleiche CAD- und oder CAM-Programm kann als "OEM"-Software in die Produkte verschiedenster Fremdanbieter eingebunden werden.
Prinzipiell kann heutzutage jede beliebige zahntechnische Arbeit bis zu 100 % per CAD/CAM Software konstruiert und aus einer breiten Palette von Materialien gefertigt werden, sei es nun eine Einlagefüllung, ein Modellgerüst, ein individuelles Einzel-Abutment, eine vielgliedrige Brückenkonstruktion, ein Kronenprovisorium, eine Doppelkronen-Tertiärstruktur, eine Bohrschablone oder eine Aufbissschiene.
Entscheidende Anforderung an zahntechnisch genutzte CAD/CAM-Programme sind Import- und Export-Kompatibilität (Schnittstellen) zu gängigen Datenformaten (hier meist das STL-Format, bei dem dreidimensionale Oberflächen in winzige, geometrisch einfach zu beschreibende Dreiecke zerlegt werden). "Offene" Datenformate lassen sich auf beliebigen Fertigungsmaschinen (etwa Fräseinheiten oder Geräten zur generativen Fertigung) zur Werkstoffbearbeitung nutzen, "Geschlossene" Systeme liefern dagegen "geheime" (also firmenspezifische, proprietäre) Datenformate, die nur auf bestimmten, firmeneigenen oder lizenzierten Geräten weiterverarbeitet werden können.
Da außerordentlich hohe Präzision erforderlich ist - die Genauigkeit von Dentalscannern bewegt sich heute im Bereich zwischen 5 µm und 30 µm, die angestrebte Genauigkeit der Endpassung lässt eine Fehlertoleranz von maximal 50 µm zu - müssen geeignete CAD/CAM-Programme mit sich daraus ergebenden extrem großen Datensätzen umgehen können, die entsprechenden Computer und Fertigungssysteme eine sehr hohe Datenverarbeitungskapazität und -geschwindigkeit bieten.
... or need professional advice?
Get in touch with us or click Contact.
English | German |
---|---|
strontium glass filler | Strontiumglas-Füllkörper |
Composites also composite (from the Latin componere = to compose) are tooth-coloured filling materials with plastic properties used in dental treatment. In lay terms they are often referred to as plastic fillings, also erroneously sometimes confused with ceramic… Composites also composite (from the Latin componere = to compose) are tooth-coloured filling materials with plastic properties used in dental treatment. In lay terms they are often referred to as plastic fillings, also erroneously sometimes confused with ceramic fillings due to their tooth colour. After being placed in a cavity they cure chemically or by irradiating with light or a combination of the two (dual-curing). Nowadays, composites are also used as luting materials. The working time can be regulated with light-curing systems, which is a great advantage both when placing fillings and during adhesive luting of restorations. Dual-curing luting materials are paste/paste systems with chemical and photosensitive initiators, which enable adequate curing, even in areas in which light curing is not guaranteed or controllable. Composites were manufactured in 1962 by mixing dimethacrylate (epoxy resin and methacrylic acid) with silanized quartz powder (Bowen 1963). Due to their characteristics (aesthetics and advantages of the adhesive technique) composite restorations are now used instead of amalgam fillings.
The material consists of three constituents: the resin matrix (organic component), the fillers (inorganic component) and the composite phase. The resin matrix mainly consists of Bis-GMA (bisphenol-A-glycidyldimethacrylate). As Bis-GMA is highly viscous, it is mixed in a different composition with shorter-chain monomers such as, e.g. TEGDMA (triethylene glycol dimethacrylate). The lower the proportion of Bis-GMA and the higher the proportion of TEGDMA, the higher the polymerisation shrinkage (Gonçalves et al. 2008). The use of Bis-GMA with TEGDMA increases the tensile strength but reduces the flexural strength (Asmussen & Peutzfeldt 1998). Monomers can be released from the filling material. Longer light-curing results in a better conversion rate (linking of the individual monomers) and therefore to reduced monomer release (Sideriou & Achilias 2005) The fillers are made of quartz, ceramic and/ or silicon dioxide. An increase in the amount of filler materials results in decreases in polymerisation shrinkage, coefficient of linear expansion and water absorption. In contrast, with an increase in the filler proportion there is a general rise in the compressive and tensile strengths, modulus of elasticity and wear resistance (Kim et al. 2002). The filler content in a composite is also determined by the shape of the fillers.
Minimally-invasive preparation and indiscernible composite restoration
Composite restorations Conclusion |