Bissregistriermaterial
Die Bissregistrierung ist ein Schritt von höchster Bedeutung bei der Anfertigung von Situationsmodellen, Zahnersatz, Aufbissschienen, kieferorthopädischen Apparaturen, etc. Sie dient zur präzisen und eindeutigen Verschlüsselung der dreidimensionalen Anordnung von Oberkiefer und Unterkiefer in der gewünschten Relation.
Bissregistriermaterial
Neben zunehmend populären, technisch noch sehr aufwändigen primär digitalen (virtuellen) Verfahren werden heute meist noch analoge Registriermethoden verwendet. Dazu stehen vor allem reversibel thermoplastische (Wachs, Harze, Guttapercha), chemisch härtende (ZnO, Kunststoffe) und irreversibel elastische Bissregistriermaterialien (z.B. VPS = Vinylpolysiloxane) zur Verfügung. Sie werden entweder unmittelbar auf natürliche oder prothetische Antagonisten aufgebracht oder zur Fixierung/Verschlüsselung individuell gefertigter Bissschablonen genutzt, in der Total- und Teilprothetik etwa in Form einer Basis aus Kunststoff (früher auch Schellack) und aufgesetzten Bisswällen aus Wachs oder als Verbindung der Platten (Kunststoff, Metall) von Ober- und Unterkiefer beim Stützstiftregistrat.
Zinkoxid-Eugenol-Bissregistriermaterial
Silikon-Bissregistrat (Überprüfung)
Die den Abformmaterialien eng verwandten additionsvernetzenden Silikon-Bissregistriermaterialien (A-Silikone), bieten die Vorteile von Fließfähigkeit (geringer Bisswiderstand, Vermeidung von Bissverschiebungen) und Standfestigkeit (kein Abfließen) durch Thixotropie, Detaildarstellung (Zeichnungsschärfe), Dimensionsstabilität (Entformung aus Unterschnitten), Temperaturstabilität, guter Bearbeitbarkeit (Beschleifen und/oder Beschneiden) und Unempfindlichkeit gegenüber Feuchtigkeit oder mechanischer Belastung (Druck, Zug) nach der Aushärtung. Farbe, Transparenz oder Opazität, Abbindezeit und Endhärte (Shore A bis Shore D), sowie die Scanbarkeit sind je nach Anwendungsbereich in weiten Grenzen modifizierbar. Die Anwendung erfolgt meist als Zwei-Komponenten-Bissregistriermaterial. (Basis + Katalysator/Aktivator) in standardisierten Kartuschen, die mittels Mischpistolen und Mischkanülen angemischt und appliziert werden.
... or need professional advice?
Get in touch with us or click Contact.
English | German |
---|---|
attachment-retained denture | Geschiebearbeit, Geschiebeprothese |
Composites also composite (from the Latin componere = to compose) are tooth-coloured filling materials with plastic properties used in dental treatment. In lay terms they are often referred to as plastic fillings, also erroneously sometimes confused with ceramic… Composites also composite (from the Latin componere = to compose) are tooth-coloured filling materials with plastic properties used in dental treatment. In lay terms they are often referred to as plastic fillings, also erroneously sometimes confused with ceramic fillings due to their tooth colour. After being placed in a cavity they cure chemically or by irradiating with light or a combination of the two (dual-curing). Nowadays, composites are also used as luting materials. The working time can be regulated with light-curing systems, which is a great advantage both when placing fillings and during adhesive luting of restorations. Dual-curing luting materials are paste/paste systems with chemical and photosensitive initiators, which enable adequate curing, even in areas in which light curing is not guaranteed or controllable. Composites were manufactured in 1962 by mixing dimethacrylate (epoxy resin and methacrylic acid) with silanized quartz powder (Bowen 1963). Due to their characteristics (aesthetics and advantages of the adhesive technique) composite restorations are now used instead of amalgam fillings.
The material consists of three constituents: the resin matrix (organic component), the fillers (inorganic component) and the composite phase. The resin matrix mainly consists of Bis-GMA (bisphenol-A-glycidyldimethacrylate). As Bis-GMA is highly viscous, it is mixed in a different composition with shorter-chain monomers such as, e.g. TEGDMA (triethylene glycol dimethacrylate). The lower the proportion of Bis-GMA and the higher the proportion of TEGDMA, the higher the polymerisation shrinkage (Gonçalves et al. 2008). The use of Bis-GMA with TEGDMA increases the tensile strength but reduces the flexural strength (Asmussen & Peutzfeldt 1998). Monomers can be released from the filling material. Longer light-curing results in a better conversion rate (linking of the individual monomers) and therefore to reduced monomer release (Sideriou & Achilias 2005) The fillers are made of quartz, ceramic and/ or silicon dioxide. An increase in the amount of filler materials results in decreases in polymerisation shrinkage, coefficient of linear expansion and water absorption. In contrast, with an increase in the filler proportion there is a general rise in the compressive and tensile strengths, modulus of elasticity and wear resistance (Kim et al. 2002). The filler content in a composite is also determined by the shape of the fillers.
Minimally-invasive preparation and indiscernible composite restoration
Composite restorations Conclusion |